Skip to content
Polishing & Scratch Removal in Yuba City
Restore Your Paint’s Depth, Gloss & Shine
Google Reviews
See what our customers are saying
Paint Correction Process
With a proper paint correction and polishing service, your paint can look amazing again, and keep the clear coat healthy.
We safely, and effectively recondition a wide variety of automotive finishes like paint, glass, trim, and more. In many cases, even beyond the condition you bought your vehicle in. Paired with our detailing services, we will have you considering keeping the vehicle another ten or twenty years.
In the last 10-15 years, technology, industry understanding, tooling and products have advanced a lot. This has also expanded what is possible.
Every vehicle is different and has specific needs. Be prepared to answer a few questions when we speak, so we can make the most professional assessment/recommendations possible for you and your vehicle.
Certified Paint Correction Procedures
Our specialized skill sets, tooling, and knowledge can help you achieve your goals. Our in-depth understanding of the different paint types, from classic single-stage paint, to the newer matte and gloss finish base-coat & clear-coat paint systems, and how to address them all specifically, gives us a unique edge over the competition.
Choose a qualified, experienced shop to begin with, and avoid the costly body shop repair bills.
Preparation for Paint Correction
The Process
A gentle hand wash, followed by a “clay bar” decontamination steps removes all impurities in the paint. This process leaves a prepped, uncontaminated, clean surface, ready for the paint correction and polishing phases.
Working clean all the way through, is the key to a quality paint finish.
A vehicle inspection is performed at the time of service. Paint depth measurements are taken, and analyzed, to make sure there is enough paint to safely remove the undesirable defects and scratches from the paintwork. Keeping your paint system intact, and extending the life of your vehicle’s paint, is the whole point.
The Test Spot
Performing a test spot, by putting a polisher to the paint, is necessary to determine the appropriate course of action. This is a process we go through individually for every vehicle. No two vehicles are the same. They can all require slightly different combinations of cutting and/or polishing pads, depending on the level of defect removal you desire.
Not all paint is created equal either. Some manufacturer’s paint is harder and takes longer to correct. Some paint is softer and can require further steps to finish out properly. Even paints on the same model vehicle from the same year can behave differently with different pads and polishes.
Our experience and process allow us to hone in on the right combination quickly and safely to deliver maximum depth, gloss, and a pristine paint finish.
Multi-Step Vs. One-Step Paint Correction?
We make adjustments to deliver peak performance on a case by case basis. Optimizing the level of scratch removal for the specific service level and budget. Clear coat with light defects, including wash marring(scratches), and subtle oxidation can generally be restored with a One-Step polish and leave a paint finish that is extremely glossy, with the proper clarity. At a certain point, it will require a multi-step paint correction to address the problem completely.
How much does Paint Correction cost?
Paint correction removes or greatly reduces defects within the clear coat; scratches deep enough to cut through the clear coat may need touch-up or repaint. We’ll always tell you honestly what’s achievable before we begin.
Enhancement Polish
From $149
A single-stage jeweling polish that revives gloss and clears light swirls and haze for a crisp, reflective finish. Perfect for newer or well-kept paint that just needs to shine again.
ONE-STEP PAINT CORRECTION
From $449
One refined cutting-and-polishing stage that removes light-to-moderate swirls, oxidation, and water spots — recovering most of your finish and restoring deep, lasting gloss.
TWO-STEP PAINT CORRECTION
From $999
A full compounding and refining process that tackles moderate-to-severe swirls, scratches, and defects — our deepest gloss and clarity short of wet sanding.
To protect the results, ask about adding a ceramic coating.
Pricing varies by vehicle size, condition, and the level of correction and finish you want. Text us a photo for an exact quote.
Wet sanding & show-level finishes: consultation required — book or text us photos.
Medium to Severe Defect Removal
In the case of medium to severe scratches, sanding marks, or heavy swirls, a multi-step paint correction will be necessary to fully correct the paint defects. In those situations, we continue testing each phase and determine the proper process for your specific paint.
Once we test both cut and finish polish steps, to make sure the entire vehicle will turn out with a crystal clear, swirl free finish, the real work begins. We check our work with professional lighting that mimics the sun, as we work around each panel of the car one by one, downsizing tools where necessary.
Zero Burned Edges
All edge work is done with smaller 1″ diameter and 3″ diameter random orbital machines to guarantee we never burn an edge. True paint correction, maximum depth, clarity, and gloss, while being mindful of the paint depth and your paint’s longevity..
Specific Vehicle Precautions
Certain vehicles can have previous damage, and some areas should be avoided at all cost with a machine due to lack of paint to work with. Each vehicle can have their own unique challenges and individual circumstances that we take into full consideration upon servicing your vehicle.
Fine Tuning Performance
We fine tune the approach, before dialing in the optimal combination to achieve the desired results. This is 100% necessary to professionally deliver the level of correction you are looking for. Along with the best finish, maximum efficiency, and most cost effective as possible. By testing this way, we can determine the proper level of correction required, without removing any more paint than absolutely necessary to achieve the desired results.
The ability to adjust variables like pads (course to fine), pad material choices (wool, microfiber, foam), buffing liquids (course to fine), machine speed, arm speed, wetting agents, and proper clean out methods, guarantee we can put a high quality finish on your vehicle that meets your budget and exceeds your expectations.
Our process allows us to effectively measure and monitor the paint depth. As well as, monitor the micro amount of paint being removed in the process. This helps guarantee the health and integrity of the paint system as a whole. We will never chase anything so deep, that removing it, would risk long term damage to your paint system.
The goal is to remove as little paint as possible, while at the same time, achieve the desired results.
Breathe Life Back Into Your Paint
Working clean is paramount. When machine polishing and correcting/cutting paint, we clean out our pads for every section pass. Sometimes we use up to five or six or more fresh cutting pads for a single vehicle correction. This ensures the cleanest and most uniform finish possible.
Paint correction, also known as compounding, polishing, “cut and buff”, swirl and scratch removal, etc, is a process consisting of refinishing flawed, damaged, and/or oxidized paint.
We are able to safely recondition paint and other exterior surfaces properly the first time. Using intelligent combinations of machines, pads, and buffing liquids each with unique abrasion levels of their own.
The act of physically putting a polisher to the paint is not enough. One must be careful. Constantly considering the inherent paint properties and potential failure points. Being mindful of different techniques, heat introduction, tooling, pad and buffing liquid combinations, specific vehicle precautions, and even the physical limitations of the paint itself.
Other Information
Certain levels of paint correction services are already included in our ceramic coating packages.
*** More steps can be necessary depending on paint condition and the level of finish you’re seeking. We make sure to be as up-front as humanly possible with you.
It is recommended to follow up any form of paint correction with a quality ceramic coating to preserve and extend the life expectancy of the vehicle’s paint system. See our Ceramic Coating Protection Packages for more information, or feel free to give us a call.
Contact us for precise pricing on full corrections and coatings. Our coating packages already include a light one-step polish to cleanup the finish, add gloss, and acts as a final prep for the coating installation.
Contact Us
Please reach out with any questions you may have about the process, and what you can expect. We love what we do, and we equally appreciate the opportunity to serve you.
Careful consideration goes into analyzing each vehicle, case by case. This way, we ensure the most accurate and professional recommendations possible.
Give us a follow on Linkedin facebook, instagram. Let us know you found us and leave a comment, or send us a direct message!
At Purity Auto Hygienics, one-step paint correction runs $449.99 to $749.99, and two-step (multi-stage) correction ranges from $999 to $1,479. Final pricing depends on your vehicle’s size, its paint condition, and the level of correction and finish you want. Not sure which you need? Text us a photo and we’ll give you an honest quote.
A one-step correction refines your paint in a single stage — ideal for newer or well-kept vehicles with light swirls, haze, or minor oxidation. A two-step (multi-step) correction adds a dedicated compounding stage to remove moderate-to-severe swirls, scratches, and defects for the deepest gloss and clarity. We’ll assess your paint — and can do a test spot — to recommend the right level for your vehicle and budget.
Paint correction removes or dramatically reduces swirls, light-to-moderate scratches, water spots, oxidation, and haze that sit within the clear coat. Scratches deep enough to have cut through the clear coat can’t be fully polished out without touch-up or repaint — but we’ll always tell you honestly what’s achievable before we begin.
Results last as long as the corrected paint stays protected and properly maintained. Because correction reveals fresh, defect-free paint, we strongly recommend locking in that finish with a ceramic coating — it protects the work, keeps the gloss for years, and makes upkeep far easier. Ask us about pairing correction with a coating.